Measuring ranges (measured values)
Flue gas temperature/differential temperature
0/1,150 °C
Air temperature/combustion air temperature
-20/+200 °C
Draft
-70/+70 hPa
Differential pressure
-150/+150 hPa
Barometric pressure
500/1,150 hPa
Pitot
0.5/70 m/s
O<sub>2</sub> measurement
0/21 Vol.-%
CO<sub>H2</sub> measurement
Maximum:
0/10,000 ppm
CO measurement
0/40,000 ppm
NO measurement
0/5,000 ppm
Additional technical specifications
Indication (calculated values)
CO<sub>2</sub>, CO<sub>Undiluted (air-free)</sub>, Lambda<sub/>, Eta efficiency, Flue gas losses qA, Dew point<sub/>, temperature difference, CO mg/m<sup>3 </sup>(natural gas), CO mg/kWh (fuel oil)
Operating temperature range
Ambient:
5/40 °C
Storage:
-20/+50 °C
Weight (measuring instrument)
631/643 g (depends on equipment with sensors)
Dimensions
W x H x D:
90 x 220 x 53 mm
Degree of protection
IP 42 (EN 60529)
Display
TFT colour display 3.5 "
W x H:
53 x 71 mm
240 x 320 pixels
Connections
Draft/pressure:
∅ 7 mm
Gas:
∅ 8 mm
Temperature:
Socket type K
Supply voltage
Lithium-ion battery (3.6 V/2,900 mAh)
Power supply unit (mini USB)
Battery or mains
Hours of operation
Max. 12 Stunden
Data memory
MicroSD card, max. 32 GB
Data logger
1-999 seconds, interval freely selectable
Interfaces
Infrared,
Bluetooth<sup>®</sup>,
QR code generator,
MicroSD card slot
Approvals
1. BImSchV,
KÜO (TÜV ByRgG 301),
EN 50379-2
Scope of delivery
-
Measuring instrument
-
Calibration report
-
Protective sleeve for device with magnets
-
Power supply unit NTE 5 USB-A
-
Charging cable USB-A - mini USB
-
MicroSD card with USB 2.0 SD card reader
-
Base handle AWS-B for interchangeable probes 2.4 m condensate filter cartridge/draft
-
Interchangeable probe AWS-S 300 mm
-
Condensate filter cartridge KFP
-
Infiltec fine filter (5 pieces)
-
Teflon membrane (5 pieces)
-
Ambient air probe TFB-UL 50-1
-
Connection kit ASS-DP
-
Case