Display
Backlit graphical LC display,
Visible area 55 x 46 mm,
Indication of measured values max. 7 digits,
Temperature indication,
Time,
100-segment bar chart potential input value,
User interface language selectable (German/English),
Duration and intensity of of backlight adjustable
Indication of measured values
bar, mbar, hPa, kPa, MPa, psi, inHg, cmHg, mmHg, inH<sub>2</sub>O, mmH<sub>2</sub>O, mH<sub>2</sub>O, or kg/cm<sup>2</sup>
Selectable pressure unit
Temperature indication
Measuring range:
-10/+55 °C
Resolution:
0.1 °C
Accuracy:
± 2 K
Data logger
Stores pressure values and sensor temperature (sec., min., hour, daily at an adjusted time)
Max. 600,000 values
Adjustable measurement interval
Zero correction
From the front via keypad
Measuring accuracy
Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
< 0/0.4 bar:
≤ ± 0.125 % FSO (BFSL)
≥ 0/0.4 bar:
≤ ± 0.05 % FSO (BFSL)
Long-term stability
≤ ± 0.1 % FSO/Jahr
Overpressure safety
At least 3 x FS
40 bar:
105 bar
400 bar:
1,000 bar
Burst pressure
At least 5 x FS
400 bar:
1,250 bar
Operating temperature range
Medium:
-10/+55 °C
Ambient:
-10/+55 °C
Storage:
-20/+70 °C
Housing diameter
100 mm
Process connection
G½B (DIN 3852)
G½B (EN 837-1)
Material
Housing:
Stainless steel 304
Process connection:
Stainless steel 304
Diaphragm:
Stainless steel 316 L
Seal:
FKM (Viton)
Wetted parts
Process connection, diaphragm, Seal
Mounting position
Any
Supply voltage
3 x 1.5 V AA batteries
Battery service life
Standard mode:
> 2,000 Stunden
Standby mode:
> 5 Jahre
Current input
Without backlight:
Approx. 1.3 mA
With backlight:
Approx. 16 mA
Depends on adjusted intensity
Standby mode:
Approx. 1.2 µA
Degree of protection
IP 67 (EN 60529)
CE conformity
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
Pressure Equipment Directive 2014/68/EU (module A)
Scope of delivery
-
Precision digital pressure gauge DIM 30
-
Batteries
-
PC connection cables
-
Evaluation software on CD-ROM
Options
-
Other process connections
-
Without seal (weld version only for process connections as per EN 837)