Low-noise thermostat valve body with threaded connection M30 x 1.5 mm for thermostat control heads and actuators. Mounting cap with valve shut-off function. Adjustment range 20 to 340 l/h, fully adjustable with standard radiator bleed screw key. Pre-adjustment directly readable without scale.
The patented valve insert with automatic flow limiter automatically limits the water volume adjusted at the valves, independent of pressure variation in the heating system. This means that Vario-DP always supplies the right water volume to the radiator, regardless of the number of open or closed thermostat valves in the system. The valve insert can be replaced with the MGV mounting unit at operating pressure without the system having to be drained.
<div class="gallery-information">
<p>
<strong>Patented valve insert with dynamic flow limiter.Since the control membrane is installed directly in the valve insert and since the valve spindle is used as the pressure sensor, there are no additional control components which might be subject to pollution. The valve operates with a standard valve gasket and does not require additional dirt filters.</strong>
</p>
<b>Legend:</b>
<ol>
<li>P1 = pressure inlet</li>
<li>Membrane expands at increasing differential pressure</li>
<li>Vario-DP: Dynamic valve insert</li>
<li>Dimensions valve housing as per EN 215</li>
<li>Fully adjustable with standard radiator bleed screw key</li>
</ol>
</div>
